Running route analyzer
Plan your race station by station. Upload the race GPX or KML, set your target and start time, then see when you reach each aid station and how much time you have before its cut-off. For a long run, pick Training: stations become refill points, with no cut-offs.
Step 1: Race route
Once a route is in, you get
- Arrival time at each aid station and your margin before its cut-off
- 2D/3D map and elevation profile with the stations on it
- Pace per km and per terrain, with GAP
- Fuel per section: what to carry from the start, what to take at stations
- Lock screen wallpaper, pace band and CSV tables
For a race or a training long run. The file is read on your device and not uploaded anywhere.
How to plan your race station by station
- Upload the race GPX or KML from the organiser, your running app or your smartwatch app. No file yet? Try an example route first.
- Set your target finish time and the start time (flag-off) from the race guide, then pick your race-day condition.
- Add the aid stations and cut-off times from the race guide. Your arrival at each station and the margin before its cut-off appear straight away.
- Save the lock screen wallpaper, print a pace band, download the GPX for your smartwatch, or download CSV tables for your coach.
No target finish time yet? Work it out with the pace calculator . Find your next race in the trail race list or the race calendar .
How to read the results
Arrival times and time before the cut-off
Arrival at each aid station is worked out from your start time, your target, and how hard each section is. The margin shows how long you have before that station’s cut-off. Under 15 minutes is marked close: plan to leave stations with 15 to 20 minutes in hand, because queues for water, refilling and toilets take longer than you expect.
Pace strategy per terrain
- Flat (-3 to 3%): run your target pace with even breathing.
- Gentle climb (3 to 12%): shorten your stride and let the pace drop before your breathing runs away.
- Steep climb (over 12%): power hiking with short steps often costs less energy than forcing a run.
- Steep descent (below -12%): shorten your stride, keep your knees soft, and put sure footing first.
Food and drink
Aid stations at Indonesian races usually have water and a sports drink, and many trail races add banana, watermelon or warm sweet tea. Check the race guide for what each station has, then pick the same items here so the amounts match what you will actually eat. The fuel style can be gels, real food (bread, boiled potato, rice balls, dates) or a mix of both.
Related guides (in Indonesian)
- Your first trail run: how it differs from road running, gear and preparation
- Running pace: what it means, how to work it out and how to use it
- Choosing a smartwatch for running: the features that matter for beginners
Questions
What is a cut-off time?
A cut-off time is the latest clock time to reach an aid station or the finish. Runners who arrive later are usually stopped by the organiser and recorded as DNF (did not finish). Each station’s cut-off is listed in the race guide.
How is the arrival time at each aid station worked out?
The tool shares your target finish time out over each piece of the route by how hard it is: climbs get more time, gentle descents a little less. Arrival at a station is the start time plus the time of every piece before it, plus your stops at earlier stations if you set them. The margin is the cut-off time minus the arrival time.
What is a pace band and how do I make one?
A pace band is a small table on your wrist with each station, its km, your arrival time and its cut-off, so you do not have to do sums mid-race. Here, open "Pace band" under Take it to race day, check the preview and print it. Cover it with clear tape so sweat does not ruin it.
How do I set a pace strategy for a trail race?
On trails an average pace means little, because climbs and descents differ so much. Use the race GPX so each climb gets a fair share of time, add the cut-off for each station, and check which one is closest. In the advanced settings you can set how strong you are on climbs, how you pace the race, and how long you stop at stations (per station too).
Can I use it for a training long run?
Yes. In the Plan step, pick Training. Stations become refill points (a shop, a car or home) and cut-offs are left out. The summary shows the longest stretch without a refill, so you know how much water to carry.
What is GAP (grade-adjusted pace)?
GAP is the pace on flat ground that takes the same effort as your pace on a climb or descent. In the pace per km table, a GAP that stays similar from km to km means your effort is even, even though your real pace moves with the terrain.
Can I use real food instead of gels?
Yes. Under Food and drink, choose the Real food or Mixed style. The options include banana, dates, jam sandwiches, salted boiled potato, boiled sweet potato, rice balls and honey, with per-serving amounts estimated from food tables. Solid food takes more chewing and water, so it usually sits better at lower intensity, such as trail races and long runs. Try it in training first.
Are the example routes real races?
No. The two example routes, with their stations and cut-offs, are made up for trying the tool. For your race, upload the organiser’s GPX and add the stations and cut-offs from the race guide.
How do I put the GPX from this tool on my smartwatch?
Add or change the stations first, then download "GPX for your smartwatch" under Take it to race day. The file holds the route plus your stations and cut-offs. Import it in your smartwatch app under routes or courses, then sync. If you did not change the stations, use the organiser’s original GPX.
How much carbohydrate and fluid should I take during a race?
A widely used guide (Jeukendrup, 2014): about an hour or less needs almost no carbohydrate, 1 to 2 hours about 30 g per hour, and more than 2 hours about 60 g per hour, up to 90 g per hour with a trained gut. For fluid, the ACSM position stand gives a range of 400 to 800 ml per hour, adjusted for sweat and weather. This tool follows those carbohydrate amounts for the length of your plan, uses 600 ml of fluid per hour (780 ml in hot weather), and you can change every amount.
Why is pace on climbs and steep descents slower than on the flat?
On a climb each step also lifts your body weight, so the same pace costs more energy. On gentle descents you can go a little faster, but on steep ones your quads work hard to brake and the pace slows again. The tool slows climbs by up to 2.4 times, then adjusts every section so the total still matches your target.